Cisco Systems 5515 X User Manual

2 Disassemble the Slide Rail  
Pull the inner slide rail from the outer slide rail.  
Front  
Slide the plastic tab forward, and pull the inner slide rail to  
disconnect it from the outer slide rail.  
Repeat the steps on this page for the other slide rail.  
3
 
3 Attach Inner Rails to the Chassis  
Align one of the inner slide rail key holes over the chassis  
shoulder screw on one side. Slide the inner slide rail forward so  
that the shoulder screw is securely in place.  
Use a Phillips screwdriver to secure the inner slide rail with one  
B
Phillips flat-head screw  
.
Secure the other inner slide rail to the chassis by repeating the  
previous steps on this page.  
4
 
4 Verify the Rack Type  
The slide rails are pre-assembled for square hole racks. See the  
following steps for the different rack types:  
Round hole racks. Go to “Round Hole Racks” on page 6.  
The following figure shows the slide rail with square hole rack  
inserts.  
5
 
5 Round Hole Racks  
Using a Phillips head screwdriver, remove the square insert from  
the rear of the rail. Keep the two Phillips head screws.  
Remove the square insert from the front of the rail. Keep the  
two Phillips head screws.  
C
Align the round hole insert  
to the rear of the rail, and secure  
it with two of the saved screws.  
C
Align the round hole insert  
to the front of the rail over the  
hooks, and secure it with two of the saved screws.  
6
 
6 Threaded Hole Racks  
Using a Phillips head screwdriver, remove the square hole insert  
from the rear of the rail.  
Remove the square hole insert from the front of the rail.  
D
Align the threaded hole bracket  
to the front of the rail over  
E
the hooks. Secure it with the threaded hole standoff  
flat-head screwdriver.  
using a  
No additional hardware is necessary for the rear adapter.  
Repeat these steps page for the other slide rail. Go to the“Attach  
7
 
7 Attach the Outer Slide Rail to  
Round and Square Hole Racks  
Align the front of one of the outer slide rails with the rack  
upright, push it forward, and click it into place. Align the rear  
of the outer slide rail with the rack upright, pull the release tab,  
push the slide rail toward the rack, release the tab, and click it  
into place.  
Note  
For racks shorter than 24 inches in depth, remove the  
rear bracket with a Phillips head screwdriver, pull the  
release tab, and adjust the slide rail to the appropriate  
length for the rack.  
Front of  
Rack  
Rear of  
Rack  
Rear of  
Bracket  
Secure the other outer slide rail to the rack by repeating the  
previous steps.  
8
 
8 Attach the Outer Slide Rail to  
Threaded Hole Racks  
Align the slide rail to the front rack post. Secure it with two of  
F
the included Phillips pan-head screws  
.
Align the slide rail to the rear rack post. Secure it with two of  
F
the included Phillips pan-head screws  
.
Align the other slide rail to the rack by repeating the previous  
steps on this page.  
9
 
9 Install the Chassis  
Align the inner slide rails to the outer slide rails. Install the inner  
slide rails into the outer slide rails until they lock into place.  
Pull the side release tabs to unlock the inner slide rail, and push  
the chassis assembly into the rack.  
10  
 
10 Secure the Chassis  
Secure the chassis to the rack with the front captive screws.  
Obtaining Documentation and Submitting a  
Service Request  
For information on obtaining documentation, submitting a  
service request, and gathering additional information, see the  
monthly What’s New in Cisco Product Documentation, which  
also lists all new and revised Cisco technical documentation, at:  
ml  
Subscribe to the What’s New in Cisco Product Documentation as  
an RSS feed and set content to be delivered directly to your desktop  
using a reader application. The RSS feeds are a free service. Cisco  
currently supports RSS Version 2.0.  
11  
   
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other  
relationship between Cisco and any other company. (1110R)  
© 2012 Cisco Systems, Inc. All rights reserved.  
Americas Headquarters  
Cisco Systems, Inc.  
San Jose, CA  
Asia Pacific Headquarters  
Cisco Systems (USA) Pte. Ltd.  
Singapore  
Europe Headquarters  
Cisco Systems International BV Amsterdam,  
The Netherlands  
Cisco has more than 200 offices worldwide. Addresses, phone numbers, and fax numbers are listed on  
the Cisco Website at www.cisco.com/go/offices.  
Printed in the USA on recycled paper containing 10% postconsumer waste.  
78-19691-04  

Envision Peripherals EN9110 User Manual
Elo TouchSystems 1947L User Manual
Electrolux 881061 User Manual
Diamond Multimedia Stealth S9250 User Manual
Dell AXIM X3 User Manual
ClearOne comm C100s User Manual
BT 3105 User Manual
AT T TL91270 User Manual
Asus Widescreen Lcd Monitor VE208T User Manual
Asus Motherboard K8V X User Manual