Cisco Systems ISA570W User Manual

Quick Start Guide  
Cisco Small Business  
ISA500 Series Integrated Security Appliances  
(ISA550, ISA550W, ISA570, ISA570W)  
Package Contents  
ISA500 Series Integrated Security Appliance  
Two Wi-Fi Antennas (for ISA550W and ISA570W only)  
Rack Mounting and Desktop Placement Kit  
Power Cord and Adapter  
RJ-45 Ethernet Cable  
Quick Start Guide  
Product CD  
Getting to Know the Cisco ISA500 Series  
Integrated Security Appliances  
2
This section lists the available model numbers to help you become familiar  
with your security appliance, and shows the front panel and back panel of  
the unit.  
Product Models  
Model  
ISA550  
Description  
Cisco ISA550 Integrated 1 WAN port, 2 LAN ports, 4 configurable  
Security Appliance ports, and 1 USB 2.0 port  
Configuration  
ISA550W Cisco ISA550 Integrated 1 WAN port, 2 LAN ports, 4 configurable  
Security Appliance with ports, 1 USB 2.0 port, and 802.11b/g/n  
Wi-Fi  
ISA570  
Cisco ISA570 Integrated 1 WAN port, 4 LAN ports, 5 configurable  
Security Appliance ports, and 1 USB 2.0 port  
ISA570W Cisco ISA570 Integrated 1 WAN port, 4 LAN ports, 5 configurable  
Security Appliance with ports, 1 USB 2.0 port, and 802.11b/g/n  
Wi-Fi  
NOTE Any configurable port can be configured to be a WAN, DMZ, or LAN  
port. Only one configurable port can be configured as a WAN port at a  
time. Up to 4 configurable ports can be configured as DMZ ports.  
Front Panel  
ISA550 Front Panel  
ISA550  
Cisco Small Business  
SPEED  
LINK /ACT  
1
2
3
4
5
6
7
POWER/SYS VPN  
USB  
WAN  
LAN  
CONFIGURABLE  
ISA550W Front Panel  
ISA550W  
Cisco Small Business  
SPEED  
LINK /ACT  
1
2
3
4
5
6
7
POWER/SYS VPN  
USB  
WLAN  
WAN  
LAN  
CONFIGURABLE  
Cisco ISA500 Series Integrated Security Appliances Quick Start Guide  
3
ISA570 Front Panel  
ISA570  
Cisco Small Business  
SPEED  
LINK /ACT  
1
2
3
4
5
6
7
8
9
10  
POWER/SYS VPN  
USB  
WAN  
LAN  
CONFIGURABLE  
ISA570W Front Panel  
ISA570W  
Cisco Small Business  
SPEED  
LINK /ACT  
1
2
3
4
5
6
7
8
9
10  
POWER/SYS VPN  
USB  
WLAN  
WAN  
LAN  
CONFIGURABLE  
Front Panel Lights  
The following table describes the lights on the front panel of the security  
appliance. These lights are used for monitoring system activity.  
Light  
Description  
POWER/SYS  
Indicates the power and system status.  
Solid green when the system is powered on and is  
operating normally.  
Flashes green when the system is booting.  
Solid amber when the system has a booting problem, a  
device error occurs, or the system has a problem.  
VPN  
Indicates the site-to-site VPN connection status.  
Solid green when there are active site-to-site VPN  
connections.  
Flashes green when attempting to establish a site-to-site  
VPN tunnel.  
Flashes amber when the system is experiencing problems  
setting up a site-to-site VPN connection and there is no  
VPN connection.  
USB  
Indicates the USB device status.  
Solid green when a USB device is detected and is  
operating normally.  
Flashes green when the USB device is transmitting and  
receiving data.  
WLAN  
Indicates the WLAN status.  
Solid green when the WLAN is up.  
(ISA550W and  
ISA570W only)  
Flashes green when the WLAN is transmitting and  
receiving data.  
4
Cisco ISA500 Series Integrated Security Appliances Quick Start Guide  
Light  
Description  
SPEED  
Indicates the traffic rate of the associated port.  
Off when the traffic rate is 10 or 100 Mbps.  
Solid green when the traffic rate is 1000 Mbps.  
LINK/ACT  
Indicates that a connection is being made through the port.  
Solid green when the link is up.  
Flashes green when the port is transmitting and receiving  
data.  
Back Panel  
The back panel is where you connect the network devices. The ports on  
the back panel vary depending on the model.  
ISA550 and ISA550W Back Panel  
Power  
Switch  
Reset  
Button  
ANT01  
ANT02  
7
6
5
4
3
2
1
12VDC  
ANT01  
ANT02  
I
O
LAN  
WAN  
CONFIGURABLE  
RESET  
POWER  
Power  
Connector  
WAN  
Port  
USB  
Port  
Configurable LAN  
Ports Ports  
ISA570 and ISA570W Back Panel  
Power  
Switch  
Reset  
ANT01  
Button  
ANT02  
10  
9
8
7
6
1
5
4
3
2
12VDC  
ANT01  
ANT02  
I
O
CONFIGURABLE  
LAN  
WAN  
RESET  
POWER  
Power  
Connector  
WAN  
Port  
USB  
Port  
Configurable  
Ports  
LAN  
Ports  
Cisco ISA500 Series Integrated Security Appliances Quick Start Guide  
5
Back Panel Descriptions  
Feature  
Description  
ANT01/ANT02  
Threaded connectors for the antennas (for ISA550W and  
ISA570W only).  
USB Port  
Connects the unit to a USB device. You can use a USB  
device to save and restore system configuration, or to  
upgrade the firmware.  
Configurable  
Ports  
Can be set to operate as WAN, LAN, or DMZ ports. The  
ISA550 and ISA550W have 4 configurable ports. The  
ISA570 and ISA570W have 5 configurable ports.  
NOTE Only one configurable port can be configured as a  
WAN port at a time. Up to 4 configurable ports can be  
configured as DMZ ports.  
LAN Ports  
Connects PCs and other network appliances to the unit.The  
ISA550 and ISA550W have 2 dedicated LAN ports. The  
ISA570 and ISA570W have 4 dedicated LAN ports.  
WAN Port  
Connects the unit to a DSL or cable modem, or other WAN  
connectivity device.  
RESET Button  
To reboot the unit, push and release the RESET button for  
less than 3 seconds.  
To restore the unit to its factory default settings, push and  
hold the RESET button for a minimum of 3 seconds while  
the unit is powered on. The POWER/SYS light will flash  
green when the system is rebooting.  
Power Switch  
Powers the unit on or off.  
Power Connector Connects the unit to power using the supplied power cord  
and adapter.  
Mounting the Cisco ISA500 Series  
Integrated Security Appliances  
3
You can place your security appliance on a desktop, mount it on a wall, or  
mount it in a rack.  
Placement Tips  
Ambient Temperature: To prevent the security appliance from  
overheating, do not operate it in an area that exceeds an ambient  
temperature of 104°F (40°C).  
Air Flow: Be sure that there is adequate air flow around the security  
appliance.  
6
Cisco ISA500 Series Integrated Security Appliances Quick Start Guide  
Mechanical Loading: Be sure that the security appliance is level and  
stable to avoid any hazardous conditions.  
To place your security appliance on a desktop, install the supplied four  
rubber feet on the bottom of the security appliance. Place the security  
appliance on a flat surface.  
Wall Mounting  
The wall mounting hardware is user-supplied. We recommend that you use  
the following mounting screws to install your security appliance to the wall.  
The wall-mounting features on the bottom of the unit allow the front of the  
unit to face either upward or downward.  
1
3
2
4
1 8 mm/0.32 in  
2 25 mm/0.98 in 3 6.5 mm/0.26 in 4 18.6 mm/0.73 in  
WARNING Insecure mounting might damage the device or cause injury.  
Cisco is not responsible for damages incurred by improper  
wall-mounting.  
STEP 1 Determine where you want to mount the security appliance. Verify  
that the surface is smooth, flat, dry, and sturdy.  
STEP 2 Secure two M3 x 0.63 inch (16 mm) pan head wood screws, with  
anchors, into the wall 9.21 inches (234 mm) apart horizontally.  
Leave about 1/8 inch (3 to 4 mm) of the screw threads beneath the  
screw head exposed.  
STEP 3 Place the wall-mount slots over the screws and slide the unit down  
until the screws fit snugly into the wall-mount slots.  
Cisco ISA500 Series Integrated Security Appliances Quick Start Guide  
7
Rack Mounting  
You can mount the security appliance in any standard size, 19-inch (about  
48 cm) wide rack. The security appliance requires 1 rack unit (RU) of  
space, which is 1.75 inches (44.45 mm) high. The rack-mounting kit is  
included with the unit.  
CAUTION  
Do not overload the power outlet or circuit when installing  
multiple devices in a rack.  
STEP 1 Place one of the supplied silicon rubber spacers on the side of the  
security appliance so that the four holes align to the screw holes.  
Place the rack mount bracket next to the silicon rubber spacer and  
install the M3 screws.  
STEP 2 Install the security appliance into a standard rack as shown below.  
Place the washers on the brackets so that the holes align to the  
screw holes and then install the M5 screws.  
Step 2  
Step 1  
Connecting the Cisco ISA500 Series  
Integrated Security Appliances  
4
STEP 1 If you are installing the ISA550W or ISA570W, screw each antenna  
onto a threaded connector on the back panel. Orient each antenna  
to point upward.  
STEP 2 Connect the security appliance to power using the supplied  
power cord and adapter. Make sure that the power switch is  
turned off.  
8
Cisco ISA500 Series Integrated Security Appliances Quick Start Guide  
STEP 3 For a DSL or cable modem, or other WAN connectivity devices,  
connect an Ethernet network cable from the device to the WAN  
port on the back panel. Cisco strongly recommends using  
Category 5E or better cable.  
STEP 4 (Optional) For network devices, connect an Ethernet network cable  
from the network device to an available LAN port on the back panel.  
STEP 5 Power on the connected devices.  
STEP 6 Power on the security appliance. The lights on the front panel for  
all connected ports light up to show active connections.  
A sample configuration is illustrated below.  
Internet  
Access  
Network  
Device  
Public  
Devices  
Web Server  
Power  
10  
9
8
7
6
1
5
4
3
2
12VDC  
ANT01  
ANT02  
I
O
CONFIGURABLE  
LAN  
WAN  
RESET  
POWER  
Getting Started with the Configuration  
5
You can log in to the ISA500 Series Configuration Utility and complete the  
initial configuration by using the Setup Wizard; follow these steps:  
STEP 1 Connect a computer to an available LAN port on the back panel of  
the security appliance.  
Your PC will become a DHCP client of the security appliance and  
will receive an IP address in the 192.168.75.x range.  
STEP 2 Start a web browser. In the Address bar, enter the default LAN IP  
address of the security appliance: 192.168.75.1.  
STEP 3 When the login page opens, enter the username and password.  
The default username is cisco. The default password is cisco.  
Usernames and passwords are case sensitive.  
Cisco ISA500 Series Integrated Security Appliances Quick Start Guide  
9
STEP 4 Click Login.  
For security purposes, you must change the default password of  
the default administrator account.  
STEP 5 Enter the new administrator password and click OK.  
The Setup Wizard will now launch.  
STEP 6 Follow the on-screen prompts to complete the initial configuration.  
Suggested Next Steps  
6
Congratulations, you are now ready to start using your security appliance.  
You may want to configure some of the following items to secure your  
network:  
Upgrade your firmware to the latest version.  
Configure the VLANs, DMZs, and WLANs.  
Configure the zones.  
Configure the WAN redundancy if you have two ISP links.  
Configure the zone-based firewall.  
Configure the UTM services such as Intrusion Prevention (IPS),  
Anti-Virus, Application Control, Spam Filter, Web URL Filtering, and Web  
Reputation.  
Configure the VPNs for site-to-site and remote secure access.  
Configure the WAN, LAN, and Wireless QoS settings.  
To configure these features, you can use the wizards or menus in the left  
navigation pane of the Configuration Utility. For complete details, see the  
Cisco ISA500 Series Integrated Security Appliances Administration Guide  
10  
Cisco ISA500 Series Integrated Security Appliances Quick Start Guide  
Where to Go From Here  
7
Support  
Cisco Small Business  
Support Community  
Cisco Small Business  
Support and Resources  
Phone Support Contacts  
Firmware Downloads  
Product Documentation  
Cisco ISA500 Series  
Integrated Security  
Appliances Technical  
Documentation  
Cisco Small Business  
Cisco Partner Central for  
Small Business (Partner  
Login Required)  
Cisco Small Business Home www.cisco.com/smb  
Cisco ISA500 Series Integrated Security Appliances Quick Start Guide  
11  
Americas Headquarters  
Cisco Systems, Inc.  
170 West Tasman Drive  
San Jose, CA 95134-1706  
USA  
78-19625-01  
Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S.  
and other countries. A listing of Cisco's trademarks can be found at www.cisco.com/go/  
trademarks. Third party trademarks mentioned are the property of their respective owners.  
The use of the word partner does not imply a partnership relationship between Cisco and any  
other company. (1005R)  
© 2012 Cisco Systems, Inc. All rights reserved.  

Hobart CG821 User Manual
Envision Peripherals Envision EN 980e EN 980E User Manual
Electrolux E36EC75HSS User Manual
Eizo T57S User Manual
Cypress STK14C88 5 User Manual
Cherry Culture J82 16001 User Manual
Cadco LINE CHEF XAF 133 User Manual
Asus P4T E User Manual
Asus Computer Monitor VW227 User Manual
AEG 35610C User Manual