Cisco Systems Network Card CAB 530MT User Manual

CAB−530MT Serial Cable Specifications  
Document ID: 46802  
Introduction  
Prerequisites  
Requirements  
Components Used  
Conventions  
CAB−530MT Serial Cable Assembly  
EIA−530 DTE Cable Pinouts (DB−60 to DB−25)  
Related Information  
Introduction  
This document provides the technical and cable specifications for the CAB−530MT serial cable.  
Prerequisites  
Requirements  
There are no specific requirements for this document.  
Components Used  
This document is not restricted to specific software and hardware versions.  
The information in this document was created from the devices in a specific lab environment. All of the  
devices used in this document started with a cleared (default) configuration. If your network is live, make sure  
that you understand the potential impact of any command.  
Conventions  
Refer to Cisco Technical Tips Conventions for more information on document conventions.  
CAB−530MT Serial Cable Assembly  
The cable gender for this product (part number 72−0797−01) is Male DB−60 to Male DB−25, mode − DTE  
only.  
The CAB−530MT cable is used in the Cisco 7000 family, Cisco 4000 series, Cisco 3600 series, Cisco 2500  
series, Cisco 1600 series, Cisco access servers, and AccessPro PC cards. This cable has a male DB−60  
connector on the Cisco end and a male DB−25 connector on the network end.  
 
J1−49 MODE_1  
J1−5  
CF(A),  
DCD/DCD+ J2−8 DCD+  
<−−−  
<−−−  
J1−6  
DCD/DCD− J2−10 CF(B),  
DCD−  
J1−24  
J1−23  
DB(A),  
J2−15 TxC+  
TxC/RxC+  
TxC/RxC−  
<−−−  
<−−−  
J2−12 DB(B),  
TxC−  
J1−26  
J1−25  
DD(A),  
RxC/TxCE+ J2−17 RxC+  
<−−−  
<−−−  
RxC/TxCE− J2−9 DD(B),  
RxC−  
J1−44  
J1−45  
LL  
LL/DCD  
J2−18  
−−−>  
Circuit_  
GND  
CD(A),  
Circuit_GND J2−7  
J1−7  
J1−8  
DTR/DSR+ J2−20 DTR+  
−−−>  
−−−>  
DTR/DSR− J2−23 CD(B),  
DTR−  
J1−13  
J1−14  
DA(A),  
TxCE/TxC+ J2−24 TxCE+  
−−−>  
−−−>  
TxCE/TxC− J2−11 DA(B),  
TxCE−  
1Any pin not referenced is not connected.  
2The EIA−530 interface cannot be operated in DCE mode. A DCE cable is not available for the EIA−530  
interface.  
Related Information  
Technical Support & Documentation − Cisco Systems  
Contacts & Feedback | Help | Site Map  
© 2007 − 2008 Cisco Systems, Inc. All rights reserved. Terms & Conditions | Privacy Statement | Cookie Policy | Trademarks of  
Cisco Systems, Inc.  
Updated: Jan 27, 2006  
Document ID: 46802  
 

Belkin Bluetooth Headset B3 User Manual
Black Box Network Hardware ACS2001A User Manual
Blaupunkt Car Stereo System RDM 169 US User Manual
Bolens Chipper 450 Series User Manual
BRK electronic Carbon Monoxide Alarm RM4 User Manual
Broan TV Mount 942224 P1 User Manual
Bush Hog Lawn Mower CLR48 User Manual
Canon Printer MP240 User Manual
Capcom Video Games 13388340460 User Manual
Cisco Systems IP Phone ol 8143 01 j User Manual